Point Of Lay Pullets For Sale

'm back here again presenting this fiberglass version of the Lightning McQueen blue version but different sponsor fictional (obviously)

As you can see sometimes to start painting something like this piece of fiberglass, it requires some effort and some of these figures have to show, due to the rough finish coming out of his mold.

filler paste over the chicken with large holes visible that would allow to make the surface smooth. pulp filler is preferably sand canvas with sandpaper number 80, once matched the surface should also remove deep scratches which in turn is left with sandpaper sandpaper median number 150 that can be sandpaper. the sand it without water as the pasta is losing so damping qualities without which our paint would not last long enough to spend a bit damp cloth to remove residual dust.

Now the remaining details will be easily covered by the putty or filler, it is noted that there are primary to prepare the surface with a capacity filler.

putty also on the sand it with finer sandpaper for best results before applying the universal primary target, this what we diluted from 100% to 150% with standard and thinner applies gravity gun at a pressure of no more than 50 pounds of the compressor or less than the 35 pounds of air from the compressor output.

For the painting, in this case has good gloss acrylic enamel, I recommend to establish the first universal white fine sandpaper preferably those who are used ah, but clean. Avoid touching the surface if you have some sort of grease or oil on hands, it would result that the paint falls into contaminated areas of these would be separated, leaving the so-called fish eyes thus hindering the smooth completion of the painting

blue painted and decorated, staff in this type of work I prefer freehand

exepcion

to some parts carefully delimitation and the need for these counters, masking tape to occupy half an inch.

finally finished our work, is waiting to apply a clear polyurethane coating which will give the final gloss and resistance protective layer against the sun and weather elements. While I remain so to serve, attn. killerbrush friend.