Hello again friends, let me present on this occasion, the following work done in airbrush and fiberglass. Starting to shape the form and structure of a small tire which only serve to give the illusion of being functional in the car Lightning McQueen, who will see right here as we paint.
deal at this early stage semi rigid materials
polifoam
such as dense.
The coating is really easy to implement and consists of pasta to fill dents.
After thorough sanding, proceed to wax the surface.
With their respective applied film separator Brush, dry and cover it with white gelcoat.
Once applied the gel coat, reinforced with several layers of fiberglass. Of course they have to wait until completely dry the gelcoat.
Here ended our mold started to produce all the tires that deal.
Made ya, need to be decorated as that will give the final image.
Process
certainly not easy, so I lived my friend and assistant Nachin jajajaja scratched as I had not done before. Neither Nachin will learn the proper way for his own good future. Prepared fiberglass surfaces with a good washing and degreased using soap and water after prepsol which is a very effective degreaser.
apply several coats of white first automotive use is universal, preferably white because it helps greatly to light colors like this shade of red reach to cover perfectly.
Most of the work is freehand, but it helps a lot of masking tape can be any size but preferably the one that fits the needs of the design
It is noteworthy that not discard the traditional use of the sable brush.
Thus ended. Thanking you in advance for your kind visit to my humble blog. See you there.
polifoam 
Process 
0 comments:
Post a Comment